Product
Heat removal evaluation equipment
Delivery place: The industrial technical research institute
This
equipment shall set the model used for an airplane experiment to MU300 which a
diamond air service holds, and shall fill the electric power which suits the
layout inside the plane for a weightless experiment, a rack size, and safety.
About the information concerned, the airplane experiment system user guide
(the C-th edition of revision) by the National Space Development Agency creation
is considered as reference. This machine consists of three main elements of sample,
a heating part, and a cooling part. As for the diameter of 4mm and the diameter
of 8mm, and length, sample sets size to 250mm, respectively. On the occasion of
heating of sample, it heats at a copper block heater and the sensor for controlling
the heater concerned, a controller, and overheating prevention equipment are
formed. It cools by circulating the cold water separately controlled by 25 to 50
degree C in the visitor block made from copper of provision by part for a
maximum of 1.7l./on the occasion of cooling of sample (1/8 inch piping), and the
200W pelche cooling module for the circulation equipment made to circulate
through the cooling water concerned, a cooling-water storage tank (capacity of
5l. or less), and cooling-water temperature maintenance is prepared.
© 2024 UCHUSEN Inc. returns to page top.